
General
The Serial Number (e.g. APA....) is on the motor data label on each product and on every box, on the bottom near the barcode.
The table below shows different Mover models proposed in combination with Waver.
![]() |
Define how much water movement your tank needs. Consider:
|
NOTE: When powered with Waver, we do consider an average % for suggested model calculation.
Example: For a 160gal aquarium with MED density population = 1x Waver Master + 2x MX4100 (Advanced System Pack)
Alternatively, you can install Mover pumps alone (with fixed flowrate) and buy the Waver in a second moment
NOTE: Pumps with fixed flowrate operate at 100% power, so you can choose smaller models.
![]() |
Define how much water movement your tank needs. Consider:
|
NOTE: generally a tank requires a total movement in L/h (gph) from 20x to 40x of its volume
Example: A 160gal aquarium with MED density population = 2x MX3000 (Advanced System Pack)