As the law in force, the warranty given for all new products is a 2 year warranty.

On some products, Rossmont extends the warranty for a further 12 months, for a total period of 36 months (3 years). These products are labeled with the following symbol:

The original box is required for warranty validity (together with the purchase receipt) and it must be kept for all its duration.

Without it the warranty is not valid.

You can ask your reseller to contact us or otherwise you can send us directly an This email address is being protected from spambots. You need JavaScript enabled to view it. and we'll answer you in the shortest time possible.

Find the nearest dealer	Contact us

The Serial Number (e.g. APA....) is on the motor data label on each product and on every box, on the bottom near the barcode.

The table below shows different Mover models proposed in combination with Waver.

 

Define how much water movement your tank needs. Consider: Tank volume (in gal) Aquarium population density (LOW= light grey column; MED - HIGH=dark grey columns) Quantity of rocks  Type of corals Method of tank management

 

NOTE: When powered with Waver, we do consider an average % for suggested model calculation.
Example: For a 460L aquarium with MED density population = 1x Waver Master + 2x MX13400 (Advanced System Pack)

Learn more

 

Alternatively, you can install Mover pumps alone (with fixed flowrate) and buy the Waver in a second moment

NOTE: Pumps with fixed flowrate operate at 100% power, so you can choose smaller models.

Define how much water movement your tank needs. Consider: Tank volume (in gal) Aquarium population density (LOW= light grey column; MED - HIGH=dark grey columns) Quantity of rocks  Type of corals Type of tank management

 

NOTE: generally a tank requires a total movement in L/h (gph) from 20x to 40x of its volume
Example: A 410L aquarium with MED density population = 2x M7200 (Advanced System Pack)

Learn more