Loaderbig

Setup and operation

{

Cycle Preset 

CYCLE   White Loop alternations from minimum to maximum power.

Adjusting its parameters you can obtain different effects (wave, cross-wave, gyre, ...).

Parametres Preset Cycle 01

MIN (%): minimum power value (in percentage)

MAX (%): maximum power value (in percentage)

T MIN (sec): stable duration at minimum power (in seconds)

T MAX (sec): stable duration at maximum power (in seconds)

T RISE (sec): transition time to pass from MIN to MAX (in seconds). Min value of 0.25

T FALL (sec): transition time to pass from MAX to MIN (in seconds). Min value of 0.25

 
NOTE: Minimum pulse duration can result in 0,5 sec

 

Learn how to create waves in your aquarium using the Cycle preset.

 

Watch the video tutorial 

Youtubesubscribe

Preset Types

 

{

Yes of course, Waver is designed to recreate the natural ocean currents on coral reef. There can be different effects you can obtain with the Mover + Waver.

CYCLE   White Use the Preset "Cycle" and edit the adjustable parameters to obtain the desired wave.


Some suggestions:

- The higher is the difference between MIN% - MAX%, the better is the wave effect (example 1% - 100% ) 

- TRISE and TFALL: leave these parameters at minimum (0,25 sec)

- TMIN and TMAX: this values change accordingly to the length of the tank and the pump models. This defines the increase / decrease in waves level. 

 

Examples:

Wave effect

- Movers' placement: opposite short sides

- MIN%: 1     MAX%: 100

- TRISE / TFALL (sec): 0,25 

- TMIN / TMAX (sec): 

  • Tank length -> 24in -> 0,22*
  • Tank length -> 35in -> 0,32*
  • Tank length -> 47in -> 0,43*

- CH1 not inverted CH2 inverted

*Average values of maximum wave. Surrounding values will result in a lower wave effect.

Try to increase / decrease these values to obtain the desired wave and wait 20-30 seconds to let the wave stabilize.

Watch the video tutorial 

Wave Effect

Youtubesubscribe

 

Cross-wave effect

- Movers' placement: opposite short sides

- MIN%: 1     MAX%: 100

- TRISE / TFALL (sec): 0,25 

- TMIN / TMAX (sec): 

  • Tank lenght -> 24in -> 0,06*
  • Tank lenght -> 35in -> 0,10*
  • Tank lenght -> 47in -> 0,14*

- CH1 not inverted CH2 not inverted

*Average values of maximum wave. Surrounding values will result in a lower wave effect.

Try to increase / decrease these values to obtain the desired wave and wait 20-30 seconds to let the wave stabilize.

Watch the video tutorial 

Waver   Cross Wave

Youtubesubscribe

 

Gyre

- Movers' placement: opposite long sides

- MIN%: 1     MAX%: 100

- TRISE / TFALL (sec): 0,25 

- TMIN / TMAX (sec): 

  • Tank width -> 11in -> 0,04*
  • Tank width -> 17in -> 0,08*
  • Tank width -> 24in -> 0,12*

- CH1 not inverted CH2 not inverted

*Average values of maximum wave. Surrounding values will result in a lower wave effect.

Try to increase / decrease these values to obtain the desired wave and wait 20-30 seconds to let the wave stabilize.

Watch the video tutorial

Create Gyre   Waver

Youtubesubscribe