FAQ

Loaderbig

Setup and operation

  • Plug the Waver into wall socket
  • The system does a fast auto-checkup and the 3 LEDs will pulse 5 times. Wait until the central white LED is stable.
  • With your PC / Tablet / Smartphone Wifi turned on, check the list of available networks. Connect to Waver’s Wifi Network Name (e.g. “Rossmont###...”)
  • In your web browser (es. Chrome, Safari, Firefox, ecc ...) type the following address: 192.168.9.75
  • Once the login screen appears, type user and password as following: USER -> rossmont  PASSWORD -> waver

Once the login procedure is completed the main screen appears.

 

Watch the video tutorial 

Youtubesubscribe

Setup Waver

 

 

Yes of course, to customize IP address click on CONFIGURATION menu -> Network settings ->edit the "IP address" box. After this operation the device will reboot and you need to refresh the page after. In your web browser type the new IP address.

 

Watch the video tutorial

Youtubesubscribe

Waver IP Address

 

To include Waver in your existing home WLAN (Wireless Local Area Network) the operation is in 3 simple steps and you have to save ONLY at the end of all operations (otherwise you will have to reset Waver by tapping touch button for 20sec):

Click on CONFIGURATION menu
Configuration
1 - Click on - > Network settings -> in the Ip address 192.168.9.75 substitute the 9 (this number is called CLASS ID) with the same number of your home router/modem (usually it's 0 or 1 or 2 ).
IP Address 01
2- Click on -> WiFi settings -> select INFRASTRUCTURE, then insert your home wifi SSID (the name of your home wireless network), the type of password protection (usually WPA2) and the password of your home network.
WiFi Settings
3 - Now save
Tasto Save 01

At this point the Waver will be restarted. You can now connect to your home network.

Now the address of the Waver has become exactly the one typed when you have replaced the 9 in the first step. So, for example it's 192.168.0.75 or 192.168.1.75 or 192.168.2.75

 

Watch the video tutorial 

Youtubesubscribe

Insert Waver Into A LAN

 

FIRMWARE - This updates the internal flash memory of the device. The firmware contains all the hardware instructions and it's important to keep this updated with the latest version recommended by Rossmont.
New firmware versions could contain improvements for existing products, general hardware improvements, bug fixes, and/or even the required informations to drive new Rossmont devices.
SOFTWARE - This update only the software with latest improvements and it's important to keep this updated with the latest version recommended by Rossmont.

You can upgrade both in Direct Access (not possible with iPhone or iPad) or in Infrastructure mode.

 

Visit download area section to freely download the latest software / firmware version.

Download


To update Firmware / Software
click on CONFIGURATION menu -> Update Firmware / Update Software -> Choose the Firmware / Software file previously downloaded -> Click on UPLOAD.

The 3 LEDs will start blinking (firmware 3min approx - software 15min approx). After this operation, the Waver will automatically restart. When the white LED is ON and stable the Update is succesfully completed. Now you can login to verify the software / firmware  version has correctly been updated.

IMPORTANT: Don't unplug the Waver during upgrade, don't let the PC to go in standby during upgrade and wait with the upload page on browser open (do not browse to another page during process).

 

Watch the video tutorial

Youtubesubscribe

Update Firmware Update Software

Waver can be hard reset in two ways:

1 - Tap&hold the capacitive touch button for 20 seconds

2 - Click on CONFIGURATION menu -> RESET TO FACTORY DEFAULT

This resets the unit to factory default configurations.

IP address is: 192.168.9.75

User: rossmont  Password: waver

Wifi mode: Direct Access

SSID: Rossmont#######

 

Youtubesubscribe

Watch the video tutorials  

Capacitive Touch Button Reset Waver

Cycle Preset 

CYCLE   White Loop alternations from minimum to maximum power.

Adjusting its parameters you can obtain different effects (wave, cross-wave, gyre, ...).

Parametres Preset Cycle 01

MIN (%): minimum power value (in percentage)

MAX (%): maximum power value (in percentage)

T MIN (sec): stable duration at minimum power (in seconds)

T MAX (sec): stable duration at maximum power (in seconds)

T RISE (sec): transition time to pass from MIN to MAX (in seconds). Min value of 0.25

T FALL (sec): transition time to pass from MAX to MIN (in seconds). Min value of 0.25

 
NOTE: Minimum pulse duration can result in 0,5 sec

 

Learn how to create waves in your aquarium using the Cycle preset.

 

Watch the video tutorial 

Youtubesubscribe

Preset Types

 

Yes of course, Waver is designed to recreate the natural ocean currents on coral reef. There can be different effects you can obtain with the Mover + Waver.

CYCLE   White Use the Preset "Cycle" and edit the adjustable parameters to obtain the desired wave.


Some suggestions:

- The higher is the difference between MIN% - MAX%, the better is the wave effect (example 1% - 100% ) 

- TRISE and TFALL: leave these parameters at minimum (0,25 sec)

- TMIN and TMAX: this values change accordingly to the length of the tank and the pump models. This defines the increase / decrease in waves level. 

 

Examples:

Wave effect

- Movers' placement: opposite short sides

- MIN%: 1     MAX%: 100

- TRISE / TFALL (sec): 0,25 

- TMIN / TMAX (sec): 

  • Tank length -> 24in -> 0,22*
  • Tank length -> 35in -> 0,32*
  • Tank length -> 47in -> 0,43*

- CH1 not inverted CH2 inverted

*Average values of maximum wave. Surrounding values will result in a lower wave effect.

Try to increase / decrease these values to obtain the desired wave and wait 20-30 seconds to let the wave stabilize.

Watch the video tutorial 

Wave Effect

Youtubesubscribe

 

Cross-wave effect

- Movers' placement: opposite short sides

- MIN%: 1     MAX%: 100

- TRISE / TFALL (sec): 0,25 

- TMIN / TMAX (sec): 

  • Tank lenght -> 24in -> 0,06*
  • Tank lenght -> 35in -> 0,10*
  • Tank lenght -> 47in -> 0,14*

- CH1 not inverted CH2 not inverted

*Average values of maximum wave. Surrounding values will result in a lower wave effect.

Try to increase / decrease these values to obtain the desired wave and wait 20-30 seconds to let the wave stabilize.

Watch the video tutorial 

Waver   Cross Wave

Youtubesubscribe

 

Gyre

- Movers' placement: opposite long sides

- MIN%: 1     MAX%: 100

- TRISE / TFALL (sec): 0,25 

- TMIN / TMAX (sec): 

  • Tank width -> 11in -> 0,04*
  • Tank width -> 17in -> 0,08*
  • Tank width -> 24in -> 0,12*

- CH1 not inverted CH2 not inverted

*Average values of maximum wave. Surrounding values will result in a lower wave effect.

Try to increase / decrease these values to obtain the desired wave and wait 20-30 seconds to let the wave stabilize.

Watch the video tutorial

Create Gyre   Waver

Youtubesubscribe

Yes of course. e.g. Presets assigned only to channel CH2 will be shown in the graph by selecting the relative icon and vice versa.

->Watch the following video tutorial

Assign A Preset To Only One Channel

Click on CONFIGURATION MENU -> GENERAL -> adjust the time and SAVE.

 

Watch the video tutorial

Setup Waver

© 2016 Rossmont Srl - CF / VAT ID IT03770180242. All Rights Reserved.

NOTE! This site uses cookies and similar technologies.

If you don't change browser settings, you agree to it.