FAQ

Loaderbig

General

You can ask your reseller to contact us or otherwise you can send us directly an This email address is being protected from spambots. You need JavaScript enabled to view it. and we'll answer you in the shortest time possible.

Find the nearest dealer

Contact us 
Where To Buy RCS

The Serial Number (e.g. APA....) is on the motor data label on each product and on every box, on the bottom near the barcode.

The table below shows different Mover models proposed in combination with Waver.

 

Rossmont Mover And Waver

Define how much water movement your tank needs. Consider:

  • Tank volume (in gal)
  • Aquarium population density (LOW= light grey column; MED - HIGH=dark grey columns)
  • Quantity of rocks 
  • Type of corals
  • Method of tank management

 

Mover Waver Table L H
NOTE: When powered with Waver, we do consider an average % for suggested model calculation.
Example: For a 460L aquarium with MED density population = 1x Waver Master + 2x MX13400 (Advanced System Pack)

 

Alternatively, you can install Mover pumps alone (with fixed flowrate) and buy the Waver in a second moment

NOTE: Pumps with fixed flowrate operate at 100% power, so you can choose smaller models.

Rossmont Mover MX   Aquarium Stream Pump   Side View

Define how much water movement your tank needs. Consider:

  • Tank volume (in gal)
  • Aquarium population density (LOW= light grey column; MED - HIGH=dark grey columns)
  • Quantity of rocks 
  • Type of corals
  • Type of tank management

 

Mover Table Faq

NOTE: generally a tank requires a total movement in L/h (gph) from 20x to 40x of its volume
Example: A 410L aquarium with MED density population = 2x M7200 (Advanced System Pack)

© 2016 Rossmont Srl - CF / VAT ID IT03770180242. All Rights Reserved.

NOTE! This site uses cookies and similar technologies.

If you don't change browser settings, you agree to it.